Race Car Oil System
The current model calls for no oil cooler, but you can find the plans with an oil cooler here.
Layout in writing:
[A] Block Out > 3/8" NPT Male to - 10AN Male fitting
[B] Block Out to Filter In > Straight Female -10AN fitting [SS Hose]
[C] Filter In > Straight Female -10AN fitting [SS Hose]
[D] Filter In > 1/2" NPT Male to -10AN Male fitting
[E] Filter Out > 1/2" NPT Male to -10AN Male fitting
[F] Filter Out to One Way Valve > Straight Female -10AN fitting [SS Hose]
[G] Filter Out to One Way Valve > 90 Degree Female -10AN fitting [SS Hose]
[H] Check Valve In > -10AN Male to 1/2" NPT Male fitting
[I] Check Valve Out to Tee > 1/2" NPT Male to 1/2" NPT Male fitting
[J] Tee Out to Block In > 1/2" NPT Male to -10AN Male fitting
[K] Tee Out to Block In > 45 Degree Female -10AN fitting [SS Hose]
[L] Tee Out to Block In > 45 Degree Female -10AN fitting [SS Hose]
[M] Block In > 3/8 NPT Male to - 10AN Male fitting
[N] Tee to Bulkhead/Accusump Valve Out > 1/2" NPT Male to 90 Degree -10AN Male fitting
[O] Tee to Bulkhead/Accusump Valve Out > Straight Female -10AN fitting [SS Hose]
[P] Tee to Bulkhead/Accusump Valve Out > Straight Female -10AN fitting [SS Hose]
[Q] Accusump Valve Out > 1/2" NPT Male to -10AN Male fitting
[R] Valve In to Accusump > 1/2" NPT Male to -10AN Female fitting
[S] Valve In to Accusump > 90 Degree 1/2" NPT Male to -10AN Male fitting
Costs $406.82
$56.02 ($32.83 + $20.00 Shipping USD) eBay Order from BoneHead
$311.23 ($250.00 USD) Canton Accusump 2 Quart w/ electric valve
$39.57 ($36.40 USD) Miller's Mule Machine and Design 801 Oil Block
$0.00 CM 4" canister filter. Free loaner from Steve Smith
Hose and connectors.
Other.
Components
x1 1/4" NPT Allen Pipe Plug Fuel Fitting
x1 #6 AN Fuel Fitting Cap -6AN
x1 #4 x 1/4 NPT Straight AN to Pipe Adapter Fitting -4AN
x2 #10 x 3/8 NPT Straight AN to Pipe Adapter Fitting -10AN
x2 #10 x 1/2 NPT Straight AN to Pipe Adapter Fitting -10AN
x1 #10 AN Straight Swivel Fuel Fitting Hose End -10AN
x1 1/8" NPT Female to -4AN Straight Fitting Gauge Adapter
Canton Accusump 2 Quart w/ electric valve
The 2 Quart Accusump is ideal for surge control on small block V-8, V-6, and 4 cylinder engines as well as pre-oiling for all engines. Has a 12" long and 4-1/4" dia. body.
Electric Accusump Valve kit provides a convenient way of operating the Accusump. They are useful when the accumulator is mounted in a hard to access location. When wired directly into the ignition switch the Accusump can be operated automatically to provide pre-oiling.
Miller's Mule Machine and Design 801 Oil Block
Used to run a remote lines out of the engine. Ideal for remote oil filter or accusump. Has 2 1/4NPT sensor ports and the mains are 3/8NPT perfect for -10AN lines and fittings. For use on all DOHC engines, includes cap screws for mounting.
CM Filters 25-006 - CM -15 REMOTE OIL FILTER -12AN PORTS (25-006)
This canister oil filter has a 4" tall remote housing, with a 2-5/8" synthetic fiber element. When room is the limiting factor this shorter filter is ideal and will still deliver absolute protection. The housing is made from a light weight 3-1/4" aluminum square extrusion, 1-1/16" -12 straight o-ring ports, and a removable top cap that allows for easy and mess free element replacement. The filter has a blue anodized body and a clear anodized end cap.
(My unit is an older model. It has 1/2" NPT connectors with a drain.)
Notes
May 2011 - Precharged the system. Engine off valve open, put 60 PSI into the tank. Closed the valve. Set PSI to 7. Turned on the engine, open valve, revs, close valve shut off engine and added 2 QTs of oil for a total of 6 in the system.
Photos
 28 Oct 09 Accusump Arrives |
 11 Nov 09 Cleaning & Testing |
 10 Dec 09 Location |
 15 Dec 09 Millers Part 801 |
 18 Dec 09 Canister Filter |
 21 Dec 09 Plate Arrives |
 22 Apr 11 Install Starts |
 05 May 11 Routing Hose |
 07 May 11 Pumping Oil |