HOME  »  Fiat 124 Vintage Racer - Gallery » 04 Oct 2009 Intake  (13 Slides)     [Page 1 of 1] :: Jump To  
  Up one level  

A little drama removing the intake. A lot more coolant flow then I was expecting.
IMG_1274 * The old NGK EP6ES. The rusted one was on cylinder #3. The bolts are from the intake. * The old NGK EP6ES. The rusted one was on cylinder #3. The bolts are from the intake. * 3264 x 2448 * (3.94MB)
IMG_1275 * The intake gasket. * The intake gasket. * 3264 x 2448 * (3.49MB)
IMG_1276 * Coolant overflow bottle. I want clean it out before installing. * Coolant overflow bottle. I want clean it out before installing. * 3264 x 2448 * (3.98MB)
IMG_1277 * Cooling centre pipe. I want to put a fresh seal because I had fluid onto of cylinder 1 port. * Cooling centre pipe. I want to put a fresh seal because I had fluid onto of cylinder 1 port. * 3264 x 2448 * (3.67MB)
IMG_1278 * Old carb. * Old carb. * 3264 x 2448 * (4.31MB)
  IMG_1274  
  IMG_1275  
  IMG_1276  
  IMG_1277  
  IMG_1278  
IMG_1279 * I put in some NGK BPR8ES for now. They were in the garage and clean from the GT6. * I put in some NGK BPR8ES for now. They were in the garage and clean from the GT6. * 3264 x 2448 * (3.68MB)
IMG_1280 * Old brake lines. I will renew them. * Old brake lines. I will renew them. * 3264 x 2448 * (4.16MB)
IMG_1281 * Cleaned all of the spark plug ports. * Cleaned all of the spark plug ports. * 3264 x 2448 * (4.67MB)
IMG_1284 * Cleaned out the cooling port. * Cleaned out the cooling port. * 3264 x 2448 * (3.76MB)
IMG_1286 * Cleaned out all the intake ports. I was concered about getting coolant into the intake ports. I wiped them out. Added some oil and packed some cloths in. I don't think there is anything to worry about. * Cleaned out all the intake ports. I was concered about getting coolant into the intake ports. I wiped them out. Added some oil and packed some cloths in. I don't think there is anything to worry about. * 3264 x 2448 * (3.36MB)
  IMG_1279  
  IMG_1280  
  IMG_1281  
  IMG_1284  
  IMG_1286  
IMG_1287 * Note how the centre water port is pluged. No more flow. Good. * Note how the centre water port is pluged. No more flow. Good. * 3264 x 2448 * (4.44MB)
IMG_1288 * Cleaned the intake from the old gasket off. * Cleaned the intake from the old gasket off. * 3264 x 2448 * (3.75MB)
IMG_1289 * Next we'll get it rebuilt and happy. * Next we'll get it rebuilt and happy. * 3264 x 2448 * (4.12MB)
  IMG_1287  
  IMG_1288  
  IMG_1289  
Album last updated on Oct 04, 2009 - 08:43 PM
Powered by Jalbum 8.5 and BluPlusPlus skin
124Racer.com