Fiat 124 Vintage Racer - Gallery - 07 Aug 2009 Roll Bar Removed

Up one level

Following the budget racer model. I'm not going to put a cage in my FIAT till after my 2010 season. So off to the Metal Super Store for some plates. Then the cutting began.

IMG_0718 * x10 3/16 thick 4x5 flat bar plates. $36.67. * x10 3/16 thick 4x5 flat bar plates. $36.67. * 3264 x 2448 * (3.48MB)

IMG_0719 * Driver rear. Had to take the wheels off to access the rear plate bolts. * Driver rear. Had to take the wheels off to access the rear plate bolts. * 3264 x 2448 * (3.65MB)

IMG_0720 * Rear section moved when released. * Rear section moved when released. * 3264 x 2448 * (3.66MB)

IMG_0721 * 3264 x 2448 * (3.83MB)

IMG_0722 * Passenger side. * Passenger side. * 3264 x 2448 * (4.34MB)

IMG_0723 * 3264 x 2448 * (4.65MB)

IMG_0724 * 3264 x 2448 * (5.3MB)

IMG_0725 * 3264 x 2448 * (4.52MB)

IMG_0726 * 3264 x 2448 * (4.17MB)

IMG_0727 * The saw of love. Bought some blades and it did the trick. Welds are crazy to cut through. My arms are still bouncing around. * The saw of love. Bought some blades and it did the trick. Welds are crazy to cut through. My arms are still bouncing around. * 3264 x 2448 * (4.34MB)

IMG_0728 * 3264 x 2448 * (4.08MB)

IMG_0729 * 3264 x 2448 * (4.14MB)

IMG_0730 * BTW this stuff is heavy. * BTW this stuff is heavy. * 3264 x 2448 * (4.97MB)

IMG_0731 * Looks weird. * Looks weird. * 3264 x 2448 * (3.7MB)

IMG_0732 * I will grind the area down. Form the plate and then weld the plate and bar together. Then the plate too the floor. * I will grind the area down. Form the plate and then weld the plate and bar together. Then the plate too the floor. * 3264 x 2448 * (5.46MB)

IMG_0733 * I will clean all of these. And put a plate in to make it easier to weld upwards. * I will clean all of these. And put a plate in to make it easier to weld upwards. * 3264 x 2448 * (4.42MB)

IMG_0734 * Ditto here. * Ditto here. * 3264 x 2448 * (5.28MB)

IMG_0735 * Cut these guy too low, but easy to correct. * Cut these guy too low, but easy to correct. * 3264 x 2448 * (4.23MB)

IMG_0736 * 3264 x 2448 * (4.26MB)

IMG_0737 * 3264 x 2448 * (4.71MB)

IMG_0738 * 3264 x 2448 * (5.1MB)

IMG_0739 * I will remove that trim piece too push the plate in a touch. * I will remove that trim piece too push the plate in a touch. * 3264 x 2448 * (4.63MB)

IMG_0740 * 3264 x 2448 * (4.55MB)

IMG_0741 * The bend will be fun, but nothing I don't have the tools to deal with. * The bend will be fun, but nothing I don't have the tools to deal with. * 3264 x 2448 * (5.34MB)

IMG_0742 * The end. * The end. * 3264 x 2448 * (3.45MB)

Album last updated on Dec 01, 2009 - 05:58 PM

Powered by and skin

124Racer.com