27 June 2009 Saturdays Work

124Racer.com Photo Gallery»2009 Photo Gallery
  • IMG 0346 Set about doing some riviting work, but ran out of supplies.
  • IMG 0347 Front and rear. If I ever do body work on the car. I'd weld the hole clean.
  • IMG 0352 I think the exhaust is being held on by a cord? Will fix that.
  • IMG 0353
  • IMG 0354
  • IMG 0355
  • IMG 0356
  • IMG 0357
  • IMG 0358
  • IMG 0359
  • IMG 0360
  • IMG 0361
  • IMG 0362
  • IMG 0363
  • IMG 0364
  • IMG 0365
  • IMG 0366
  • IMG 0367 I must be missing a plate?
  • IMG 0368
  • IMG 0369 Car uses studs.
  • IMG 0370
  • IMG 0371
  • IMG 0372
  • IMG 0377
  • IMG 0384
  • IMG 0389 Removed the driver seat. Those mounts come out next.
  • IMG 0390 BTW the floor is a patch. The org is below. Again one day she'll be fixed up.
  • IMG 0391 Just sitting on the cross member I'd be an 1" lower.
  • IMG 0392 Into the wiring I go.
  • IMG 0393 MSD box has to come out. So I set about tracing wires. The PO passed me a note pad which helped.
  • IMG 0394 Will update the fuse panel. The rend one with tin foil was to the MSD box.
  • IMG 0395 I removed the MSD wires, dizzy wires and coil. All will be patched back sortly.
  • IMG 0396
  • IMG 0397 The yellow wire is the oil warning light which ran too one of the lights on the speedo.
  • IMG 0398 MSD wires in the bottom right. Red to the ign kill switch. Orange to a white cable and black oth another black.